Gimme a sec and I'll post a link to some info. Although it seemed quite happy with those new settings in place for subsequent restarts, I've now put them back to the as delivered values, more for tidiness than anything. Do the same with Linux. I am happy for you. Obviously, it feels like you want to try alternative Operating Systems. .
Find the setting that controls which devices the system boots from. Please feel free to showing these settings for your motherboard to help others. Thus, a standard fallback filename is used for removable media. Arrow-down to Port Options and press Enter to access the menu. Use whichever keystroke is indicated on screen. Put in your boot media and hit the button I think f9 or esc to bring up the boot options menu.
Fortunately, there is no need to panic. If your computer is configured to require Secure Boot, and if the boot medium doesn't support this, then you might not see a relevant boot entry, or that boot entry might not work. Since i have no ps2 port and my only option is usb i cannot anable usb ports from bios since i cannot access bios. When power on, on the first flash screen, you will see a line of text on the bottom of screen. Using the arrow keys to navigate, arrow-down to Restore Defaults and press the Enter key. In some cases your computer may display a graphic while it starts. Instead, just like you, I am eager to ensure that the problem gets resolved.
That in the installation menu with the computer on i have plugged the hard drive and in few seconds i was able to fix the windows. From there you can navigate to the proper file ending in. However, if you just need to boot from a flash drive, it may be easier to do this from the boot manager menu - ie Tap away at the esc key as soon as you press the power button to enter the Start-up Menu and then select the Boot Options Menu f9. I've looked around and can find nothing that is a clear and b works surely it can't be this hard?! It seems as the software I used before was not the adequated or I used it not properly. Also, do not press the key too many times as you may end up locking the system or generating system errors. For more step by step instructions: Let me know how that works out, keep me in the loop and Good luck! If it does, select f10 to enter the bios menu. Use whichever keystroke is indicated on screen.
At this point windows does not load so i am trying to put the option to boot from cd-rom as a first option because when it says 'press any key to continue booting' i can not press so it boots the hard drive with the corupted windows. On different computer, the steps may be different. There is no bios button on motherboard. Typically, pressing Esc will dismiss the graphic and allow you to see the necessary messages. I tried multiple restarts and the keyboard still not working. This may be a possibility but I'm doubtful.
Also, if an external medium lacks a fallback boot loader, that medium might not show up as a bootable device, even in the boot manager menu. Typically, the F10 key is pressed 2 or 3 times to ensure that it registers. Then press Esc and F10 to save it. You may configure the order that your computer searches these physical devices for the boot sequence. If so, double check to see if you have them set the same to see if that helps. I have tried the keyboard on laptop and it works perfectly.
The computer should now restart. Has anybody seen this issue before? Step 2: Turn on the computer. You can get tips on the screen. Now to install windows i had to remove the hard drive and the computer booted the cd in that case. No matter what i did the desktop is not recognizing the keyboard. Well, after two tries of installation, yesterday I did it successfully. Trust me I've done everything I can to assist you by keeping your best interest in mind.
Tap away at the esc key as soon as you press the power button to see if this will launch the Start-up Menu. Let me know how this goes and do keep me posted about it. To whom it may concern. Again, using the arrow keys, navigate to the right until the System Configuration panel is active. The device selection menu appears. Kudos to you for that. If you read these instructions and you are not sure how to change a setting, it is better to leave it as the default setting.