This was extremely helpful for me. This site was designed and produced solely by Pelican Parts. August 11, 2016 Followup from the Pelican Staff: From pelican parts. The one challenging part was wedging the side light assemblies out without cracking them. How would I remove the A pillars in a vert e46 March 21, 2018 Followup from the Pelican Staff: There are two clips muckets close to each end of the trim panel. Comments and Suggestions: justo Comments: where can i order the clips. If the original item or suitable replacement part is not available, then this warranty is void.
If you are working with the electrical system, disconnect the battery before beginning. In this article, we will show you how to remove and replace the A-Pillar trim on an E46. The car recently ticked over. Do not use sharp metal tools when prying an interior pillar panel away from the roof liner. The corner of the fabric is cut so that it will fit the round corner of the plastic flap perfectly. That quote is nothing short of highway robbery.
I find that the new trim piece goes into the dashboard easier if I wiggle it back and forth while sliding it down. If something seems different, let us know and share your info to help other users. Country of Manufacture: Hungary Manufacture Quality: Genuine Shipping Weight lbs : 0. Pelican Parts is not responsible for any typographical errors contained within the site. When leaving a comment, please leave your vehicle information.
Information and technical articles within this website are for reference only. Crack the windows and let the vehicle sit open for approximately 6 hours, making sure that it is well-ventilated. Install the new A-pillar trim and fasteners. To avoid marring the trim or damaging the airbag, work with a plastic prying tool or wrap a screwdriver tip with masking tape before prying out the trim panels, switches or electrical accessories. On the second try, I did not thread the strings appropriately. In the following picture you can see the 3 connection points for the loop. When I pull up the trim will I be able to read the type of bag it's used? If a part fails, the original purchaser is able to return that part at any time for replacement.
. The price was competitive and your expedited delivery charge was surprisingly low. They can figure out what part or repair kit you need. Having done it once already, I am positive that I could now do it in less than 1 hour. Consult authorized factory manuals when performing repair procedures.
I needed the part fast and you exceeded my expectations. Verify that the piece sits flush against the metal frame and the fabric looks perfect. Take your time with this step as this will determine how perfect the fabric will look when the top is up. They have to be detached using a trim panel tool. Some owners try to use an adhesive to fix the problem, but the outer fabric layer is very thin and the glue comes through. If you would like to return an item or have questions about the process, please and one of our customer service experts will be happy to help. Our particular interaction has extended over many months and never have I felt that I wasn't getting first-class service.
Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. Removal and replacement was pretty straightforward, and as usual the wisdom of the crowd showed me the way. With that, on to the repair. Materials Needed: The materials for this repair are impressively low. I replaced the C-Pillar trim pieces on both sides, the interior trim between the side rear glass and the rear windshield.
Part of the reason it took me so long was because I hooked the assembly up backwards on the first try. Figure 7 Once the fasteners have been removed, pull the A-Pillar trim away from the A-Pillar, then slide up and out of the dashboard. This one was a cosmetic repair rather than mechanical. This is often due to setting your browser Security settings too high. The strings will point towards the rear of the vehicle and the adhesive strip will always be closest to the center of the vehicle. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Your technical expertise on even the minute details of building race cars is really impressive, and some I value greatly.
The only tools needed are a flat head screwdriver for the light assemblies and a T-25 Torx screwdriver for the one screw that holds the piece in place. Make sure to line up the edges of the fabric with the ridge on the rear of the flap as shown in this picture: 16 Use the fabric adhesive sparingly to attach the fabric to the plastic along the ridge on the rear of the plastic flap. Do I have your authorization to proceed? Always catch fluids in appropriate containers and properly dispose of any fluid waste. Issue: The following pictures detail the issue at hand: In both pictures, you will notice the top of the plastic piece is broken. If you experience this issue, do not put your top up or down until you repair it or your interior will likely suffer the same fate. Only the original purchaser of the part can receive a credit after they have purchased a replacement. Protect your eyes, hands and body from fluids, dust and debris while working on your vehicle.